- air temperature in the premises: 15 – 20 degrees
- relative air humidity in the premises: 50 – 65 %
- if central heating is used, it is necessary to use air moisturizer
- necessary daily airing of the premises (daily exchange of air)
- only cleaning agents for parquets and floors are allowed, as well as broom, vacuum cleaner and dry cloth
- you are not allowed to clean it with wet cloth and agents based on water
- office premises should have chairs with AV-casters (that do not damage the surface) and desks with rubber pads under the legs
Parquet installation:
- parquet is installed on a dry surface where the moisture must not exceed 2,0 %
- during parquet installation it is necessary to consult with the salesperson or contractor regarding the type of primers, adhesives, lacquers and other materials necessary for the installation because the dimensions of different kinds of wood as well as botanical kinds react to specific conditions,
- minimum requirements for parquet installation (gluing, lacquering) are stated in the instructions for use provided by the adhesive and lacquer manufacturer
- before laying the parquet floor, all varnishing works must be completed and the walls must be completely dry,
- the protective thermofoil should be removed from the parquet immediately before the installation itself,
- after gluing we must wait for a minimum period of five (5) days before parquet lacquering
Parquet storage:
- storage area must be dry and ventilated, there may not be any direct contact between parquet and water or other fluids,
- parquet must not be stored in the place where other works are conducted at the same time, which may have direct influences on its quality (e.g. laying tiles, plastering, wall leveling, covering installation, etc.),
- parquet cannot be stored in the open space because of the influence of moisture, sun and wind,
- air temperature in the premises: 15 – 20 degrees
- relative air humidity in the premises: 50 – 65 %
